Will the grinding wheel wear affect the machining accuracy?

The grinding wheel of the fully automatic glass processing center is automatically compensated and repaired.
Automatic compensation: For example, 0.1 wire is consumed for one circle of grinding, and then 0.1 wire is consumed by the grinding wheel after one circle of grinding. The system will automatically compensate for 0.1 wire to ensure the accuracy of the product.
Automatic repair: The groove of the grinding wheel will become deeper and deeper when the glass is ground, and the surface of the glass will be ground. In order to avoid this situation, the grinding wheel must be repaired in time to make the groove smaller. For example, if it is set to grind 20 pieces of glass, it will be repaired automatically once, then every time 20 pieces of glass are ground, it will automatically run to the place where the polishing wheel is repaired.